[CA11] Integrating Fusion

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Integrating Fusion

06-25-18, 09:25 AM (This post was last modified: 06-25-18 10:22 AM by Chuck - Raymarine - Moderator.)

Post: #8

Tonydjd Offline

Junior Member

Posts: 3
Joined: Mar 2018
Reputation: 0

RE: [CA11] Integrating Fusion

Thank you. I decided just to send in both units for diagnosis th e165 and A98 once I did the software update is when I started having issues thanks again.
And yes backbone terminated powered correctly.

I have
Acu 150 ng
Evo 100 ng
Cp450 raynet to a98
P70r ng
Radome 24hd raynet to e165
E165&A98 raynet together
Fusion is on ng via device net to fusion nema
Also have yamaha engine data on ng via converter
External gps antenna also on ng
Checked all ng wires and connection all tested

Pretty simple set up

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Integrating Fusion - psubill78 - 05-31-16, 08:52 AM

RE: Integrating Fusion - psubill78 - 05-31-16, 10:28 PM

RE: Integrating Fusion - Chuck - Raymarine - Moderator - 06-01-16, 12:59 PM

RE: [CA11] Integrating Fusion - Tonydjd - 06-21-18, 11:54 AM

RE: [CA11] Integrating Fusion - Chuck - Raymarine - Moderator - 06-21-18, 01:46 PM

RE: [CA11] Integrating Fusion - Tonydjd - 06-24-18, 09:48 AM

RE: [CA11] Integrating Fusion - Chuck - Raymarine - Moderator - 06-25-18, 08:41 AM

RE: [CA11] Integrating Fusion - Tonydjd - 06-25-18 09:25 AM

RE: [CA11] Integrating Fusion - Chuck - Raymarine - Moderator - 06-25-18, 10:22 AM

User(s) browsing this thread: 1 Guest(s)