Upgrading MFD to C95

[Chuck - Raymarine - Moderator]

Phil,

It is recommended that you ensure that the blue terminations plugs have been installed within the SeaTalk to SeaTalkng Converter's blue backbone sockets. If so, then it appears that the MFD is not detecting the boot files on the MFD's memory card. The most common mistake in updating product software is to copy the downloaded zip file directly to the microSD memory card. Please click here to view a FAQ addressing this subject. Also, with the introduction of the v16.49 software update, new MFD autorun files were introduced, but may not have found there way into all software downloads.

It is recommended that you again download the SeaTalk to SeaTalkng Converter software update zip file to your computer, that its contents be extracted/copied and then pasted into the root level directory of a microSD memory card. After doing so, the autorun files attached to this response should be downloaded and pasted into the root level directory of the microSD memory card, replacing those which had previously been pasted into the root level directory of the microSD memory card.

Should following the recommendations provided within this response not result in successful updating of the SeaTalk to SeaTalkng Converter's software, then it is recommended that the Converter be sent to Raymarine’s Product Repair Center to be updated.