[CA] [CA11] DSM300 with Axiom 9 Pro

[Chuck - Raymarine - Moderator]

Brad,

The Axiom Pro MFDs are not designed for use with the legacy DSM30, DSM300, and CP300 sounder modules. Should you have one of these sounder modules, then it would need to be replaced with a CP370 Sounder Module. That said, doing so would only support the same types of sonar features as had the DSM300 with one's prior MFD. If seeking to have RealVision, DownVision, SideVision, and high CHIRP (conical) Sonar imaging, then it would be necessary to install an Axiom Pro RVX MFD and then interface a RV transducer / transducer pair to the MFD. Should the currently installed transducer's cable have been directly mated to the DSM300's transducer socket (i.e. no adapters), then the transducer's cable may instead be adapted to be mated to the 1kW Transducer socket of the Axiom Pro RVX MFD ... no need for a DSM300 or CP370.