[CA] [CA11] installing updates...

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum rb56,

Please verify that you have populated the microSD memory card in the manner specified below. If not, then please delete the software update files from and populate it using the procedure specified below. The Dragonfly Display's software may then be updating by following the remainder of the procedure specified below.

It is recommended that the compressed software update folder containing the Dragonfly software update be downloaded to your computer and that its contents then be extracted into the root level directory of a microSD memory card. This process is detailed below:
Software update procedure:
1) Insert your microSD memory card into your computer's memory card reader
2) Download the desired software update compressed folder from the Dragonfly software update web page. The compressed folder containing the software update files will be downloaded from the product's software update web page and saved on the computer used to download the software update zip file ... the downloaded file will typically be located within the Downloads folder of computers running the Windows operating system
3) Open the computer's Downloads folder (or your computer's folder where downloaded files are saved)
4) Right click on the downloaded compressed folder containing the software update files to display a menu of options
5) Left click on the EXTRACT ALL menu option to display the Extract Compressed (zipped) Folders dialog
6) Left click on the Browse button within the Extract Compressed (zipped) Folders dialog to display the Select a Destination dialog
7) Within the Select a Destination dialog, left click on the drive letter corresponding to your microSD memory card, and then click on the OK button.
8) After all files have been extracted, remove the microSD memory card containing the software update files from the computer's memory card reader
9) Power the Dragonfly Display OFF
10) Insert the microSD memory card containing the software update files into the Dragonfly Display's memory card reader
11) Power the Dragonfly Display ON ... the software will begin to load automatically as evidenced by the scrolling white DOS text on the display's black screen. When complete, the Dragonfly Display display the Limitations of Use dialog
12) Remove the microSD memory card containing the software update files from the Dragonfly Display