[CA11] DSM300 with Axiom 9 Pro

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] DSM300 with Axiom 9 Pro

06-27-18, 09:39 AM (This post was last modified: 06-27-18 09:59 AM by Chuck - Raymarine - Moderator.)

Post: #3

bradjhutch Offline

Junior Member

Posts: 4
Joined: Jun 2018
Reputation: 0

RE: [CA11] DSM300 with Axiom 9 Pro

So if I'm understanding, I "MAY" not need to order the Axiom 9 Pro RVX MFD "WITH" transducer because if the current transducer was directly connected to the DSM300 socket then my current transducer can use an adapter to connect to the new Axiom 9 (current transducer being a M260)? If this is the case, do you know which adapter I need to purchase for the transducer?

thanks

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] DSM300 with Axiom 9 Pro - bradjhutch - 06-26-18, 12:23 PM

RE: [CA11] DSM300 with Axiom 9 Pro - Chuck - Raymarine - Moderator - 06-26-18, 02:47 PM

RE: [CA11] DSM300 with Axiom 9 Pro - bradjhutch - 06-27-18 09:39 AM

RE: [CA11] DSM300 with Axiom 9 Pro - Chuck - Raymarine - Moderator - 06-27-18, 10:10 AM

RE: [CA11] DSM300 with Axiom 9 Pro - bradjhutch - 06-27-18, 12:41 PM

RE: [CA11] DSM300 with Axiom 9 Pro - Chuck - Raymarine - Moderator - 06-27-18, 01:25 PM

RE: [CA11] DSM300 with Axiom 9 Pro - bradjhutch - 06-27-18, 03:14 PM

RE: [CA11] DSM300 with Axiom 9 Pro - Chuck - Raymarine - Moderator - 06-27-18, 03:37 PM

RE: [CA11] DSM300 with Axiom 9 Pro - jon_s - 04-10-19, 12:10 AM

RE: [CA11] DSM300 with Axiom 9 Pro - Chuck - Raymarine - Moderator - 04-10-19, 07:46 AM

User(s) browsing this thread: 2 Guest(s)