Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] P70 Tack buttons
06-27-18, 03:53 PM (This post was last modified: 07-03-18 08:38 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] P70 Tack buttons
Hello Shm,

Do you ever have any problems with the +/- buttons for normal course-changes? If not, I would guess that the cause of the failure to tack might be the Gybe Inhibit function, which prevents auto-tacks downwind (is your wind data accurate?) Other than that, perhaps it's just the timing of the keypresses: is the p70 mounted in a location where it's hard to hit both buttons with two fingers at the same time?

I don't think we are planning to change the Auto Tack shortcut keys because we've been using that shortcut for over 20 years and there are a lot of users who are very familiar with it, I think we'd get a lot of complaints if we changed it.

If you have a problem with one of the buttons in normal course-change use then it's probably a good idea to get the display checked by the dealer you bought it from.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] P70 Tack buttons - shm - 06-21-18, 01:27 AM
RE: [TG11] P70 Tack buttons - Tom - Raymarine - Moderator - 06-27-18 03:53 PM
RE: [TG11] P70 Tack buttons - shm - 07-03-18, 01:00 AM
RE: [TG11] P70 Tack buttons - shm - 07-12-18, 04:21 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)