[TG] [TG11] P70 Tack buttons
|
07-03-18, 01:00 AM
(This post was last modified: 07-03-18 08:38 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [TG11] P70 Tack buttons
Hi Tom,
thanks for your reply. No, I have not experienced any problems with the +/- buttons for course changes. Yes my wind data (i60) is correct and I have only had the problem tacking upwind. Despite being in use for 20 years doesn't makes it right, if a more simple one button solution is available. I will agree on the ST1000, that a two buttons keypress works better. But those buttons are also twice as big as on the p70. I would guess this is where the two button keypress origins from. The buttons on the P70 is simple just not adequate for a two buttons keypress (in my opinoin). The needed keypress itself are to flimsy and the buttons to small compared to the ST1000. Why not let it be up to the user with a one button keypress, since the P70 is programmable anyway? Best regards |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] P70 Tack buttons - shm - 06-21-18, 01:27 AM
RE: [TG11] P70 Tack buttons - Tom - Raymarine - Moderator - 06-27-18, 03:53 PM
RE: [TG11] P70 Tack buttons - shm - 07-03-18 01:00 AM
RE: [TG11] P70 Tack buttons - Tom - Raymarine - Moderator - 07-08-18, 07:19 PM
RE: [TG11] P70 Tack buttons - shm - 07-12-18, 04:21 AM
RE: [TG11] P70 Tack buttons - Tom - Raymarine - Moderator - 07-16-18, 01:57 AM
|
User(s) browsing this thread: 3 Guest(s)