[CA] [CA11] Replacing Analog Xducer with Digital Output

[mprestero]

This year I installed a new depth sensor (E26030-P17) and speed/temp sensor (E26031-ST800/P120) in the locations formerly occupied by that Datamarine sensors that were on the boat when I purchased it last year. As I had feared with the speed sensor, the location (port side of the hull, 6 or so feet back from the stem) resulted in different output for the same SOG on opposite tacks. I'm now considering installing the DST800 at the location the current depth sensor is located, right on the stem. My boat is an Alerion 26, without any location with minimal deadrise.

I want to order the correct transducer, but the info on the Raymarine web site seems to provide conflicting info. Is the correct part number for the DST800 I want A22111? I expect that this transducer output will go directly into the STNG network without the iTC-5.

Thanks