European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Instruments 
/
[DG] [DG11] i40 Depth with P79 Transducer erratic readings
/
[DG] [DG11] i40 Depth with P79 Transducer erratic readings
|
[DG] [DG11] i40 Depth with P79 Transducer erratic readings
|
|
07-04-18, 03:19 AM
(This post was last modified: 03-21-19 09:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[DG11] i40 Depth with P79 Transducer erratic readings
I am using i40 Depth connected to a P79 In-hull transducer on a Shrimper 17 daysailer. Correct cables used.
At times depth shown appears to be valid and changes as expected. On occasion though the reading with show 1ft, even when clearly there is more depth. The unit after some time will then revert to what appears to be a normal reading. Unable to identify yet what circumstances trigger the behaviour. Raising or lowering the centre plate is not a factor as the plate is normally down. It may be triggered by entering shallower water. Any ideas what I should do to investigate/correct? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[DG11] i40 Depth with P79 Transducer erratic readings - SAAH - 07-04-18 03:19 AM
RE: [DG11] i40 Depth with P79 Transducer erratic readings - Derek - Raymarine - Moderator - 07-04-18, 07:31 AM
RE: [DG11] i40 Depth with P79 Transducer erratic readings - BoBat - 03-21-19, 03:28 AM
RE: [DG11] i40 Depth with P79 Transducer erratic readings - Derek - Raymarine - Moderator - 03-22-19, 05:11 AM
|
User(s) browsing this thread: 2 Guest(s)