[CA11] Replacing Analog Xducer with Digital Output

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Replacing Analog Xducer with Digital Output

07-05-18, 09:43 AM (This post was last modified: 07-05-18 09:53 AM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Replacing Analog Xducer with Digital Output

mprestero,

The part number which you have referenced is for the Smart DST800, which is designed to be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. The Smart DST800 is designed to be calibrated by an i70/i70S MFID. This Smart DST800 is not designed for use with analog instrument products (ex. i50 Tridata, iTC-5, etc.). The analog version DST800 (part number A22154) is designed for use with analog instrument products.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Replacing Analog Xducer with Digital Output - mprestero - 07-03-18, 09:46 AM

RE: [CA11] Replacing Analog Xducer with Digital Output - Chuck - Raymarine - Moderator - 07-05-18 09:43 AM

RE: [CA11] Replacing Analog Xducer with Digital Output - mprestero - 07-05-18, 01:06 PM

RE: [CA11] Replacing Analog Xducer with Digital Output - Chuck - Raymarine - Moderator - 07-05-18, 01:30 PM

RE: [CA11] Replacing Analog Xducer with Digital Output - mprestero - 07-06-18, 09:42 AM

RE: [CA11] Replacing Analog Xducer with Digital Output - Chuck - Raymarine - Moderator - 07-06-18, 10:34 AM

RE: [CA11] Replacing Analog Xducer with Digital Output - mprestero - 07-06-18, 10:36 AM

RE: [CA11] Replacing Analog Xducer with Digital Output - Chuck - Raymarine - Moderator - 07-06-18, 10:46 AM

User(s) browsing this thread: 1 Guest(s)