[CA] [CA11] New equipment information

[Chuck - Raymarine - Moderator]

Lance,

Q1. What is required to connect the Quantum 2 Doppler to the Axiom pro via WIFI for the Doppler and the MARPA work?
A1. As has historically been the case for all Raymarine MFDs past and present. The MFDs are potentially capable of supporting a number of features if the system has been accessorized to satisfy the requirements of the feature desired. MARPA features require the MFD be interfaced to a compatible radome, be interfaced to a source of stabilized 10Hz heading data, and have acquired a GPS FIX either from the MFD's internal GPS receiver or from an external GPS source. Please click here to view a FAQ addressing this subject. While LH3 MFDs are capable of displaying the red/green colored radar targets within the Radar and Chart application when the vessel using COG and SOG data alone (vessel must be moving), the performance of this feature is maximized when the system has been interfaced to a source of heading data. Similarly, True Wind data items require the MFD be interface to sources of the data items specified within the FAQ found here. Another example is fishinding features, where the supported type of fishfinder imaging will be dependent upon the fishfinding circuitry built into the system's MFDs, model(s) of fishfinder sounder module(s) interfaced to the system, and model(s) of fishfinder transducer(s) which have been interfaced to the system.