[TG] [TG11] New Equipment information

[Tom - Raymarine - Moderator]

Hello lwilson,

Generally speaking, a Chirp sounder will give clearer results than non-chirp, but there are some targets which reflect (show up) better at some frequencies than others. The P66 is non-chirp, 50/200kHz. It will give a bit better performance in deeper water than the RV transducers (higher power) but at the expense of resolution and clarity (non-chirp.) The only 83kHz (non-chirp) transducers that we're compatible with are those built into Minn-Kota trolling motors, but the Axiom Pro's 1kW port can ping Airmar Chirp transducers at the Medium band which is approximately 80-130kHz (transducer-dependent.) Personally, I would always recommend chirp over non-chirp, but there's no chirp depth-speed-temperature transducer.

If P66 is the transducer you want, you can indeed connect E66054 to Axiom Pro via A80496.

Regards,
Tom