[TG] RayData Display

[Tom - Raymarine - Moderator]

Hello West32,

Units can generally only be configured on the 'master' product, that is the one that generates that type of data and sends it out over the network: other devices just repeat that selection. The problem you run into with a mixed Seatalk1-SeatalkNG system is that the data typically comes from the SeatalkNG side, but because of limitations of the design of the old Seatalk1 network, the STNG units preferences don't come through and Seatalk1 products revert to the old ST1 network defaults (depths in feet for example.) There isn't really a lot that can be done about that I'm afraid, though the latest software for the ST1-STNG convertor can help in some circumstances. The real solution would be to replace the Raydata with an i70S on SeatalkNG.

Regards,
Tom