The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] NMEA 2000 WiFi Gateway Device

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] NMEA 2000 WiFi Gateway Device
07-10-18, 02:42 PM (This post was last modified: 07-18-18 02:40 AM by Tom - Raymarine - Moderator.)
Post: #1
dlane1181 Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2016
Reputation: 0
Question NMEA 2000 WiFi Gateway Device
I’m unable to RECONNECT our Yacht Devices YDWG-02!NMEA 2000 WiFi Gateway to our Raymarine A-series MFD. (We have both A-98 (master) and A-125.).

The device was connected to the SeaTalkNG and transferring data to our 2K Yachting electronic logbook. However, I turned off all our sailing instruments overnight while pierside to conserve batteries, and I’ve been unable to reconnect the YDWG device. Firmware for the YDWG is up to date.

The device tries to connect but eventually times out, and the display on our A-98 MFD (home -> setup -> wireless connections -> WiFi -> WiFi Networks) continually shows the YDWG network with good signal strength and “Connecting”. But it never connects.

Again, this device was connected and everything was working great until I powered down our sailing instruments overnight.

Please assist.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA 2000 WiFi Gateway Device - dlane1181 - 07-10-18 02:42 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication