Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Issue with new EV-100 Power AP install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Issue with new EV-100 Power AP install
07-16-18, 11:59 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Issue with new EV-100 Power AP install
Welcome to the Raymarine Forum Rip,

The cubic capacity of the HC5345 is 8.34 cubic inches. Per the note within the FAQ found here, when used with an ACU-150 or ACU-200, a Type 0.5 pump may be used in hydraulic steering systems equipped with rams having capacities up to 150cc (9 cu. in.). However, when used with the ACU-100, it is recommended that it not be used in hydraulic steering systems equipped with rams having capacities greater than 110cc (6.7 cu. in.) in offshore and/or heavy use applications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Issue with new EV-100 Power AP install - Chuck - Raymarine - Moderator - 07-16-18 11:59 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication