Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] Zones for Fusion radio have disappeared since Axiom firmware v3.5.40

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Zones for Fusion radio have disappeared since Axiom firmware v3.5.40
07-18-18, 09:35 AM (This post was last modified: 07-18-18 09:37 AM by Derek - Raymarine - Moderator.)
Post: #3
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Zones for Fusion radio have disappeared since Axiom firmware v3.5.40
HI Martijn,

Further to your report, we believe that the interface operates correctly on the system we have tested in our offices. On the left hand side of the Audio app, you will find tabs for Zones 1-4. By selecting the tab for any zone, one may change it’s volume level. However, the option to link zone 2 to zone 1 appears to be only capable of being performed via the stereo head unit’s controls.

Is this what you have found?
Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Zones for Fusion radio have disappeared since Axiom firmware v3.5.40 - Derek - Raymarine - Moderator - 07-18-18 09:35 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication