The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Axiom Pro sounder

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom Pro sounder
07-18-18, 10:08 PM (This post was last modified: 07-19-18 01:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
gruntre69 Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2018
Reputation: 0
[TG11] Axiom Pro sounder
Hi,

I have an Axiom Pro 9 connected to an Airmar B265ML and a pair of RV 220 transducers.

I'm looking for information on how the different settings work with my transducers.

I have listed on my sonar system lots of different settings but two of them are prefixed with CW. I believe these are the B265 channels.

My question is in regard to the autochirp and the sonar settings. I would like to know which transducers these setting are reading from.

I have a problem with airation from the hull across the transducers and I get the best result from the sonar setting. To enable troubleshooting my installation it would be handy to know exactly which transducers are being referenced by each setting.

Regards
Grant

Cruisecraft 575
Axiom Pro 9 with RV220 pair and 265LM
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Axiom Pro sounder - gruntre69 - 07-18-18 10:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication