[CA] [CA11] Axiom 12 with Navionics Freezing on Bootup

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Argus,

Please excuse this late response as your thread got buried within the stack. LightHouse software versions prior to LH3 v3.5.40 featured a number of Navionics related cartography issues. LH3 v3.5.40 address all which we are presently aware of which would cause such symptoms. Should you not have already done so, it is recommended that the software within these MFDs be updated to LightHouse 3 v3.5.40 or later, that a waypoint/route/track data be backed up to a microSD card, that a Factory Reset be commanded via each MFD's user interface, and that the system be operated with only one of any one type of chart card (i.e. it is permissible to have up to three chart cards (one Navionics chart card, one LightHouse chart card, and one C-Map chart card) in the system but it is not permissible to have more than one chart card of any one type within the system.

Please additionally be aware that as the MFDs feature a last power state memory feature, should the MFDs be left in the ON state when the circuit supplying them with power is switched OFF, then the MFDs will return to the ON state when the circuit supplying them with power is switched ON.