The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] CP370 No Depths beyond 200 feet or so

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] CP370 No Depths beyond 200 feet or so
07-24-18, 05:26 PM (This post was last modified: 07-27-18 01:26 AM by Tom - Raymarine - Moderator.)
Post: #1
mistertj Offline
Junior Member
**
 		Posts: 15
Joined: Feb 2016
Reputation: 0
CP370 No Depths beyond 200 feet or so
Read on another thread with a similar problem. Recommendation was uploading the latest software might solve the problem. Downloaded the latest CP370 software 1334. Tried to upload via my E120 Classic but it stops mid way. Goes from 57% complete and then down to 50%...and stops. Then goes back to the selection screen without completing. Tried several times but getting same results.
Oh...I also get a prompt in the beginning that says same version or later software already installed. That's not possible since I bought the CP370 in May 2018 and the new CP370 software says July 2018.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CP370 No Depths beyond 200 feet or so - mistertj - 07-24-18 05:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication