[CA] [CA11] Transducer (cp100) mounting location on Pontoon Boat

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Tony,

Please excuse the delay in this response. When installed on pontoon boats, it generally doesn't make any difference whether the transducer is installed on the port or starboard pontoon as the center of each pontoon's mounting surface is usually well outboard of the prop when compared to the typical transducer mounting location of a conventional hull. Should the pontoon feature a keel, then the keel may adversely impact the transducer's ability to receive a non-aerated flow of water when the vessels speed nears and when operating at planing speeds.