Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] VRM/EBL info not displayed consistently after switching active screen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VRM/EBL info not displayed consistently after switching active screen
07-26-18, 10:15 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] VRM/EBL info not displayed consistently after switching active screen
Welcome to the Raymarine Forum delsey,

I have attempted to duplicate the reported problem using my Axiom and Axiom Pro MFDs which have been updated with LightHouse 3 v3.6.32 software and have been unable to replicate this problem. It is recommended that the software within your MFDs be updated with the LightHouse 3 v3.6.32 software. Should the problem persist there after, then it is recommended that a Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded to correct this issue.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] VRM/EBL info not displayed consistently after switching active screen - Chuck - Raymarine - Moderator - 07-26-18 10:15 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication