Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] What DSM do I need?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] What DSM do I need?
07-27-18, 07:36 AM
Post: #11
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] What DSM do I need?
Transducer options are dependent upon the model of MFD and/or fishfinder sounder module which will be installed onboard. Will you still be using the C120? If so, then I would recommend simply replacing the currently installed P66 with the Raymarine E66054 version of the P66 transducer. No new holes should need to be created ... simply unscrew the currently installed P66 and then install the new P66 transducer using the same holes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] What DSM do I need? - Adrobet - 06-18-18, 06:46 PM
RE: [CA11] What DSM do I need? - Chuck - Raymarine - Moderator - 07-27-18 07:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication