[CA] [CA11] RS 150 to e120 issue

[CBK]

Had to replace rs 125 with rs 150 using seatalk - seatalkng converter.
System includes e120, smart pilot s2/s3 series, st60's and st6002.
e120 shows correct fix, however on gps status menu no sats are shown and time is shown incorrect. even when changing time offset in time/date menu, time will not change. Also in sea talk device list shows rs125 not rs150. restart gps on gps status page, have to do twice and then time is correct. After turning off the system and turning it back on later same thing happens.
No hs switch, and no hs, or seatalk 2. Only using seatalk and 0183 port.
voltage is good. seatalk power is not supplied by smart pilot. rs125 originally
wired in seatalk bus configuration as outlined in rs125 installation guide for sea talk buss.
e120 as current 5.69 software.
Any suggestions would be appreciated.