Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] What RM hardware will be required for the drone?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] What RM hardware will be required for the drone?
07-30-18, 02:48 PM (This post was last modified: 08-02-18 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] What RM hardware will be required for the drone?
Welcome to the Raymarine Forum StriperMemories,

The following minimum set of hardware is required to support the Axiom UAV features introduced within the LightHouse 3 v3.6.32 software update:

- Axiom, Axiom Pro, or Axiom XL MFD running Light House 3 v3.6.32 software
- DJI Mavic Pro UAV or DJI Mavic Pro Platinum UAV
- Optional heading data source - ... primarily to support the chart based features where the vessel icon (along with its vectors) and drone icon (along with its vectors) will be displayed. Additionally, supports Head-Up chart orientation when vessel is stationary.
- Optional GPS data source for marine electronics (only required if MFD's installation location will not afford it to acquire and maintain a GPS position FIX ... please click here to view a FAQ addressing this subject).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] What RM hardware will be required for the drone? - Chuck - Raymarine - Moderator - 07-30-18 02:48 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication