Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] What RM hardware will be required for the drone?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] What RM hardware will be required for the drone?
07-31-18, 12:41 PM (This post was last modified: 08-01-18 09:20 AM by Chuck - Raymarine - Moderator.)
Post: #3
StriperMemories Offline
Junior Member
**
 		Posts: 14
Joined: May 2018
Reputation: 0
RE: [CA11] What RM hardware will be required for the drone?
Thanks for the information Chuck. The heading sensor (EV1) was going to present a problem for me. Can you post an explanation of how the system operates. It appears that the handheld controller is still needed. Looks like the MFD brings the drone back, then you will land it with the handheld controller.

Is the MFD simply connected to the handheld controller?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] What RM hardware will be required for the drone? - StriperMemories - 07-31-18 12:41 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication