[CA] [CA11] reboot problem

[Oregoncme]

May not be your issue...But if I had a dollar for this resulting from power dropping unexpectedly....

I would add that if the "house battery" is not isolated, starting outboard(s) with the unit on can wreak havoc on the head units.

Usually this happens after drifting ON BATTERIES ONLY then starting the motors in parallel with the electronics...or in the morning starting the motors with the electronics already on...enough times, and my experience results in the necessity too do master resets. My understanding is that the files, within the plotter, get caught up trying to begin where they get cut off due to power cycling unexpectedly. Enough of those and broken file after broken file, it just isn't a good practice.

Just a thought to ponder for others.