Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] VRM/EBL info not displayed consistently after switching active screen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VRM/EBL info not displayed consistently after switching active screen
08-13-18, 12:39 PM (This post was last modified: 08-13-18 12:41 PM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] VRM/EBL info not displayed consistently after switching active screen
Delsey,

All software corrections are not necessarily documented within the software history tables posted on Raymarine's website. As indicated within my initial response, I was unable to duplicate the reported issue within LH3 v3.6.32 ... the VRM/EBL feature appears to working properly within this version of software. Accordingly, it is recommended that your MFD's software be updated accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] VRM/EBL info not displayed consistently after switching active screen - Chuck - Raymarine - Moderator - 08-13-18 12:39 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication