Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E7D freeze up

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E7D freeze up
08-14-18, 10:20 AM (This post was last modified: 08-14-18 10:21 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E7D freeze up
Welcome back to the Raymarine Forum Mark,

Please determine which version of software is presently installed within your e7D MFD. Should the currently installed version of software not be v19.03, then it would be recommended that your waypoint, route, track, and system settings be backed up, that MFD's software be updated with LightHouse II v19.03 software, and that a System Settings & Data Reset (HOME->SET-UP->MAINTENANCE->SYSTEM SETTINGS & DATA RESET) be commanded. Should the problem persist thereafter, then it would be recommended that your MFD along with the chart card currently being used be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E7D freeze up - Mark maulden - 08-04-18, 04:42 PM
RE: [CA11] E7D freeze up - Chuck - Raymarine - Moderator - 08-14-18 10:20 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication