[CA] Navionics Platinum+ maps shared between Axiom displays?

[Chuck - Raymarine - Moderator]

DRFASailboater,

Please note that there is either an error within the submitted system diagram or within installation. More specifically, the base station for the SmartController does not feature a SeaTalkng / NMEA 2000 communications interface and as such the base station may not be installed as a spur to the backbone. Instead, the base station must be interfaced to the backbone via a SeaTalk to SeaTalkng Converter. I suspect that this is the one which you have referenced. Should the SeaTalk to SeaTalkng Converter have very early software within its memory, then it may block Data Source Selection and other features. The SeaTalk to SeaTalkng Converter is designed to be updated by Axiom MFDs which have been updated with the latest software. The LightHouse 3 v3.6.32 compressed folder which may be downloaded from the Software updates web page contains software updates for all devices which an Axiom MFD is presently capable of updating. Should one select the options displayed to update the system's other devices when updating the Axiom MFD's software, then the software within the system's other devices will be updated accordingly.

Please execute the following commands on the Data Master MFD and then attach the files produced to this thread for further analysis:
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO->SAVE DATA) ... save product info into a file titled Raymarine/My Data/Diagnostics_.json on the microSD memory card
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->SAVE LOGS) ... save product info into a file titled Crash_xxx_yyy.log.log (there may be more than one); where [censored] is the product ID / serial no. and yyy is the date.
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->SAVE SYSTEM LOGS) ... save product info into a file titled logs/Summary_xxx_yyy.log; where [censored] is the product ID / serial no. and yyy is the date.