[CA11] E120 Seatalk1 to NMEA 2000 conversion requirements

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements

08-15-18, 02:51 PM (This post was last modified: 08-16-18 07:48 AM by Chuck - Raymarine - Moderator.)

Post: #3

[email protected] Offline

Junior Member

Posts: 6
Joined: Jul 2018
Reputation: 0

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements

Thanks for the reply - appreciated.

How can I confirm the model of the currently installed GPS receiver on the seatalk1 network? As noted above there is an unidentified network entity which I assume is the GPS receiver but the model number is not announced.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - [email protected] - 08-01-18, 12:43 PM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - Chuck - Raymarine - Moderator - 08-03-18, 02:00 PM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - [email protected] - 08-15-18 02:51 PM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - Chuck - Raymarine - Moderator - 08-16-18, 07:55 AM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - [email protected] - 08-18-18, 04:07 PM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - Chuck - Raymarine - Moderator - 08-20-18, 08:57 AM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - [email protected] - 08-20-18, 09:39 PM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - Chuck - Raymarine - Moderator - 08-21-18, 07:56 AM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - [email protected] - 08-21-18, 08:41 AM

RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - Chuck - Raymarine - Moderator - 08-21-18, 08:48 AM

User(s) browsing this thread: 1 Guest(s)