C80 waypoint does not show up on ST60 MFD

[Chuck - Raymarine - Moderator]

wjj,

As the MFD may only be interfaced via SeaTalk to a Raystar 130 GPS sensor and your MFD is receiving GPS data from the Raystar 130 GPS Sensor, your MFD's SeaTalk port would be deemed to be operational. However, it is possible that your equipment has not been properly interfaced. The Raystar 130 GPS Sensor, ST70 Autopilot Control Heads (assumed as the models of these control heads have not yet been supplied) as well as the other SeaTalk devices have not been properly interfaced and/or the course computer, autopilot control heads, and SeaTalk to SeaTalkng Converter have not been updated with the latest software. The Raystar 130 GPS Sensor, ST70 Autopilot Control Heads, and X30 should each be interfaced as a spur to a powered and properly terminated SeaTalkng backbone. The MFD (red SeaTalk lead not used) and ST60+ instruments should each be interfaced to an unpowered SeaTalk bus, which in turn will be interfaced to the SeaTalk to SeaTalkng Converter's (part of the SeaTalkng backbone) yellow SeaTalk socket. The SeaTalk bus will be powered from the SeaTalkng backbone via the SeaTalk to SeaTalkng Converter.

Please click here to view a FAQ addressing this subject.