Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum Radar Cable Length Issue
08-23-18, 03:38 PM (This post was last modified: 08-27-18 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Quantum Radar Cable Length Issue
Welcome to the Raymarine Forum eljacksjr,

As a sufficiently long Digital Radar Extension Cable is not available to suit your, needs, it would be recommended that an A80229 15m Digital Radar Cable be installed in the mast and that the excess cable be loosely coiled and kept near the base of the mast to permit the mast to be removed. Power and Ethernet connections to the Digital Radar Cable may then be accommodated at the base of the mast. The Digital Radar Cable's Ethernet network plug (RayNet (F)) may in turn be interfaced to the MFD or HS5 RayNet Network Switch via an assembly which has been constructed from an A80162 RayNet (M) to RayNet (M) Cable Joiner and an appropriate length of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Quantum Radar Cable Length Issue - Chuck - Raymarine - Moderator - 08-23-18 03:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)