The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E80 MFD NEMA

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E80 MFD NEMA
08-28-18, 09:37 AM (This post was last modified: 08-29-18 02:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
1997Cruisers Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[CA11] E80 MFD NEMA
I have inherited a E80 MFD and a RD424 Radome which I plan to put on my boat. I also have a Garmin Echomap Chart Plotter which I use for navigation. To have a little redundancy, I'd like to use NEMA to connect the Echomap and E80 together so that I don' have to install a second GPS antenna for the E80. Does anyone know which NEMA wire from the E80 I should connect to the transmit wire from the Garmin? I am currently using the white wire, but I'm not getting any data. It is likely user error so I thought I'd start with the basics.

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E80 MFD NEMA - 1997Cruisers - 08-28-18 09:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication