The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Low voltage to itc5 for wind speed

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Low voltage to itc5 for wind speed
08-29-18, 08:30 AM (This post was last modified: 08-29-18 01:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
Terry L. Brabb Offline
Junior Member
**
 		Posts: 9
Joined: Feb 2016
Reputation: 0
[CA11] Low voltage to itc5 for wind speed
Put a new itc5 in. The itc5 only had 2.4v across wind terminals. Same on compass. Checked the feed wire coming to itc5 which only had 8.4v. Jumped 12v from a lug to wind red wire. Wind started working. Reconnected red wire to itc5 and wind continued to work. Turned all off. Restarted later and it still worked, still only 8.4v to itc5 and 4.3v to wind. Any idea how to increase voltage? After being off several days wind speed did not work, but after jumping 12v to red wire it worked again.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Low voltage to itc5 for wind speed - Terry L. Brabb - 08-29-18 08:30 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication