C125 to RD418HD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

C125 to RD418HD

05-09-16, 03:03 PM (This post was last modified: 05-09-16 03:38 PM by Chuck - Raymarine - Moderator.)

Post: #1

tdreesman Offline

Junior Member

Posts: 4
Joined: May 2016
Reputation: 0

C125 to RD418HD

I have a C125 (E70013) MFD application version V16.47-00513 and a RD418HD (E92142) application version 4.27. Both manuals say I should be able to connect them directly via a SeaTalk HS crossover coupler (E55060) However, when connected via the crossover my MFD says "radar not found". When I connect them both to a Raymarine switch I borrowed it works perfectly.

Did I get a bad Seatalk HS crossover coupler new out of the box? Or are these two devices not compatible via direct connection? Trying to troubleshoot before running 45min each way to W**TM****E

« Next Oldest | Next Newest »

Messages In This Thread

C125 to RD418HD - tdreesman - 05-09-16 03:03 PM

RE: C125 to RD418HD - Chuck - Raymarine - Moderator - 05-10-16, 09:32 AM

RE: C125 to RD418HD - tdreesman - 05-10-16, 02:25 PM

RE: C125 to RD418HD - Chuck - Raymarine - Moderator - 05-10-16, 07:46 PM

RE: C125 to RD418HD - tdreesman - 05-12-16, 02:49 PM

RE: C125 to RD418HD - Chuck - Raymarine - Moderator - 05-13-16, 01:58 PM

RE: C125 to RD418HD - tdreesman - 05-14-16, 11:00 AM

RE: C125 to RD418HD - Chuck - Raymarine - Moderator - 05-16-16, 03:15 PM

User(s) browsing this thread: 3 Guest(s)