[DM] [DM11] Pairing RMK-10 with Multiple Axioms

[StriperMemories]

I have three Axioms on a RayNet network connected through a switch. The RMK-10 is also attached through the network and is powered. Axiom 12RV and Axiom 9 are at the helm, an Axiom 7 DV is installed at the Bow. I was able to pair both Axiom units at the helm by going to Setup/This display/External keypads: Pair keypad. I was then prompted to press a button on the RMK-10 and each unit was paired. When, I tried to do this on the Axiom 7 DV at the bow, there was no listing for External keypads. What am I missing. All three units are running the same version of software (newest) and a Factory Reset has been tried.