[CA] [CA11] s100 base installation

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum spesce,

The plugs will need to be removed from a standard SeaTalk Cable to expose the cable's power (red), data (yellow), and ground (shield) leads. These leads will be interfaced to the corresponding terminals of the wireless base station and the ST1000's bulkhead power/data socket.

The S100 and SmartController Wireless Autopilot Remote Controls are designed to provide operation up to 30' from the base station. Range may vary based upon the RF attenuation of any materials between the base station and S100 or SmartController Wireless Autopilot Remote Controls. The S100 and SmartController Wireless Autopilot Remote Controls both feature signal strength indicators to assist in identifying whether the proposed installation location for the base station will permit sufficient signal strength to be received by the autopilot remote controls.