[CA] Speed not working - DST800 / ITC-5

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum ESCAPEARTIST,

Please see the FAQ referenced within my prior response to this thread regarding how to test the DST800's speed sensor. Alternatively, should you still have the speed/temp insert from the replaced speed transducer, then you may want to consider connecting to the i70 MFID and then testing the system again while manually spinning the transducer's paddlewheel. Any Raymarine components which are suspected to have failed should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.