The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Radar display issue, connection issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar display issue, connection issue
09-10-18, 02:26 PM (This post was last modified: 09-10-18 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
Seagirt Offline
Junior Member
**
 		Posts: 3
Joined: May 2016
Reputation: 0
[CA11] Radar display issue, connection issue
See picture below. The striations displayed in the radar image in the MFD come and go, sometimes worse sometimes better. When the range is changed the striations appear and then gradually fill in with time. A couple of times I've tapped the radar dome and it seems to make the striations in the display better. I've double checked the cable connections at both ends to make sure they are secure.

Sorry, I don't have the specs on the equipment. It was installed 2015; basic 7' MFD and digital radar dome package.

Any ideas on what the issue is and how to fix?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Radar display issue, connection issue - Seagirt - 09-10-18 02:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication