Raymarine forum / Raymarine Forums / Multifunction Displays v / [DM] [CA11] Integrating GPS sensor to E80 with NMEA

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DM] [CA11] Integrating GPS sensor to E80 with NMEA
09-18-18, 08:17 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Integrating GPS sensor to E80 with NMEA
Rob,

Unfortunately, Raymarine ceased manufacture and distribution of the E85001 PC/SeaTalk/NMEA 0183 Interface Module several years ago. Should the RS125 have failed and your MFD's NMEA 0183 port be interfaced to your VHF radio / AIS receiver as you have suggested, then it would typically be recommended that the RS125 be replaced with a Raystar 150 GPS Sensor and that it be interfaced to the system's Data Master E-Series Classic MFD. Please click here to view a FAQ addressing how this would be accomplished.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Integrating GPS sensor to E80 with NMEA - Chuck - Raymarine - Moderator - 09-18-18 08:17 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication