[CA] [CA11] Axiom not reading depth

[Chuck - Raymarine - Moderator]

FluidDynamic,

Within a system featuring a CP370, it is recommended that it be configured as the system's Depth data source (HOME->SETTINGS->NETWORK->DATA SOURCES), if the TM258 can satisfactorily track bottom while on plane. The depth at which problems began to occur is greater than the typically referenced depth limit or the 200kHz channel. When loss of bottom occurs with the CP370 200kHz or Auto channel, try switching to 50kHz. If 50kHz does not instantly acquire bottom, then manually configure the Fishfinder application's Depth range to a depth which is slightly deeper than the charted depth of the water at the vessel's location. Similarly, when viewing the Sonar channel of the Internal Sounder of the Axiom RV MFD, it would similarly be recommended that the Depth range of the Sonar channel be manually configured to a depth which is slightly deeper than the charted depth of the water at the vessel's location. Should this not correct the problem, then please respond accordingly, provide screen snapshots from the Fishfinder application pages/panes in which you are experiencing the problem, and specify how fast the vessel was going at the time that the problem manifested itself..