Autohelm ST50 Wind Instrument

[LngTmSlr]

(05-09-16 10:34 AM)Steve - Raymarine - Moderator Wrote:  1. You should be able to support 12 VDC from the Seatalk connection from the ST50. It does point toward and issue with the ST50 display.

2. Unfortunately the ST50 masthead is not compatible with the ST60/+ or the current i60 instrument displays. You will have to upgrade both the display and masthead unit. They are the same wiring colors, but the calibration perimeters are not the same and therefore are not compatible.

REPLY:
I've ordered a new i60 Wind system with standard transducer and cable. To make sure I understand you correctly, I shouldn't have to replace the cable (unless it is defective). Did I understand you correctly? Thanks for your help.