[CA11] Axiom Pro Depth and Temperature in Waypoints

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom Pro Depth and Temperature in Waypoints

10-04-18, 09:24 AM (This post was last modified: 10-04-18 01:00 PM by Chuck - Raymarine - Moderator.)

Post: #8

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints

Twinpower,

Only one water temperature source should be used by the system and the hierarchy should work automatically. However, in this case, I recommend that you configure the MFD's fishfinder transducer settings within the Fishfinder app (MENU->SETTINGS->TRANSDUCER->ENABLE TEMPERATURE SENSOR) to ensure that the system has been configured to use only one of the system's temperature sensors. Please click here to view a related thread ... please additionally check the system for any additional temperature inputs.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom Pro Depth and Temperature in Waypoints - elev0083 - 06-19-18, 06:32 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Chuck - Raymarine - Moderator - 06-20-18, 11:00 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - elev0083 - 06-21-18, 06:53 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Chuck - Raymarine - Moderator - 06-26-18, 07:45 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Twinpower - 08-20-18, 07:22 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Chuck - Raymarine - Moderator - 08-20-18, 08:02 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Twinpower - 10-04-18, 01:23 AM

RE: [CA11] Axiom Pro Depth and Temperature in Waypoints - Chuck - Raymarine - Moderator - 10-04-18 09:24 AM

User(s) browsing this thread: 2 Guest(s)