[CA11] Using an old transducer with a new plotter

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Using an old transducer with a new plotter

10-05-18, 02:52 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Using an old transducer with a new plotter

Welcome to the Raymarine Forum spellegrin,

The combination of transducer and adapter cable which you have specified is indeed valid for use with an Axiom Pro RVX MFD. In a nutshell, any transducer which was designed to be directly (no adapter) mated to a DSM30, DSM300, CP370, or CP370 may be used with an Axiom Pro RVX MFD when the adapter cable which you have specified is used.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Using an old transducer with a new plotter - spellegrin - 10-05-18, 10:59 AM

RE: [CA11] Using an old transducer with a new plotter - Chuck - Raymarine - Moderator - 10-05-18 02:52 PM

RE: [CA11] Using an old transducer with a new plotter - spellegrin - 10-05-18, 05:01 PM

RE: [CA11] Using an old transducer with a new plotter - Chuck - Raymarine - Moderator - 10-08-18, 11:09 AM

RE: [CA11] Using an old transducer with a new plotter - spellegrin - 10-08-18, 11:45 AM

RE: [CA11] Using an old transducer with a new plotter - Chuck - Raymarine - Moderator - 10-08-18, 12:15 PM

RE: [CA11] Using an old transducer with a new plotter - spellegrin - 11-08-18, 07:09 PM

User(s) browsing this thread: 4 Guest(s)