Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS 700 stopped transmitting positions

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS 700 stopped transmitting positions
10-10-18, 02:35 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AIS 700 stopped transmitting positions
Welcome to the Raymarine Forum Nokay,

Please click here to view a FAQ addressing this subject. Should the referenced voltage test not indicate a power issue and whereas the ProAIS2 software is not reporting VSWR, it would be recommended that the VHF antenna/cable assemble be tested with a VSWR meter. Should the VHF antenna/cable assembly's VSWR be within the range specified within the referenced FAQ, then the AIS700 should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] AIS 700 stopped transmitting positions - Chuck - Raymarine - Moderator - 10-10-18 02:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication