[TG] [TG11] no seatalk from a128

[firstlight38]

Hi all,

I recently took a lightning strike and replaced my autopilot with a new ev-200. My a128 mfd seemed to be fine, but when I add it to the network it only sees itself. It is odd as the data it gets from my vhf/ais radio shows the ais targets but there is nothing coming through ST ng.

I have a similar issue with the i70 instrument, but when I hook that in to the system the autopilot head shows no autopilot and the ev-1 goes into red blink which is no seatalk. I am pretty sure this is toast.

The a128 will obviously operate but can not integrate into the ev-200 since it can not be seen on the network. (if i do a diagnostic - select device from the p70s it does not see the a128)

So is there another way to be able to pass data or get this thing fixed? It seems a shame if I have to replace just because of the networking.