The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e127 GO TO WPT navigation best method?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e127 GO TO WPT navigation best method?
10-15-18, 09:20 AM (This post was last modified: 10-15-18 01:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
On Time Offline
Junior Member
**
 		Posts: 10
Joined: Nov 2016
Reputation: 0
[CA11] e127 GO TO WPT navigation best method?
How best to navigate using GO TO to a WPT? Before this unit I had a standalone third party chartplotter that gave both heading and COG and was easy to use because you could keep the boat aimed at the heading, and wind and current effects would be seen as the actual COG. The heading information allowed me to keep the bow of the boat pointed to the WPT with less zig zagging.

How then is best way to navigate to a WPT? When we tried it last weekend I was zig zagging back and forth trying to keep the best COG to the WPT since I was not given a heading to approximate.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] e127 GO TO WPT navigation best method? - On Time - 10-15-18 09:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication