[CA11] M232 and Cam220

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] M232 and Cam220

10-17-18, 06:49 PM (This post was last modified: 10-18-18 10:03 AM by Chuck - Raymarine - Moderator.)

Post: #3

boatmanmark Offline

Junior Member

Posts: 7
Joined: Jun 2017
Reputation: 0

RE: [CA11] M232 and Cam220

It is a C127. I will have to check on the software. I did update the software last summer when I installed the M232 thermal camera. That camera works great on the network port it is plugged in to. I thought the Cam220 could plug in to the other port. I go back to the boat on Friday, but it is now out for the season so I may have to wait until next spring to get this squared away. If I get there early enough on Friday I may have time to plug in the Cam220 and see if I can get it to work.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] M232 and Cam220 - boatmanmark - 10-16-18, 08:55 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-17-18, 09:52 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-17-18 06:49 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-18-18, 09:48 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-18-18, 08:11 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-19-18, 07:48 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-19-18, 07:05 PM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-19-18, 10:08 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-22-18, 01:03 PM

User(s) browsing this thread: 2 Guest(s)