[CA] [CA11] M232 and Cam220

[boatmanmark]

Thank you Chuck, this is way beyond me. My computer (Apple) does not support Windows apps, and I can't hook up the cam to it. I am going out to load the boat on a trailer Friday morning and will check the software version. Question, does it matter what network port on the C127 the Cam220 is connected to? My FLIR M232 is connected to the port to the left side looking from the back. That leaves the port to the right open, and this is where I would plug in the Cam220. Does it matter if the cam is powered up while powering up the MFD, or should I power it up after the MFD is up and running?