Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [TG] [TG11] Network Feature Request NMEA

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Network Feature Request NMEA
10-25-18, 10:20 PM
Post: #5
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Network Feature Request NMEA
Hi,

Good news: there is indeed a way for our MFDs to display engine or tank level data from other instance numbers.

I've documented the problem and a brief intro to the solution (using a PC software tool to create a custom engine data page that can be imported into the MFD) at:

http://forum.raymarine.com/showthread.php?tid=6833
http://forum.raymarine.com/showthread.php?tid=6834

I will produce some more detailed instructions over time, but in the meantime I thought I should let you know that this will allow you to display from Instances 4 and 5 and call them Port and Starboard. I have tested and confirmed this works.

I have also logged the feature request for configurable instance setup in future MFD software.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Network Feature Request NMEA - Tom - Raymarine - Moderator - 10-25-18 10:20 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication